SZM-1000 Zirconia Oxygen Measurement Module
在线气体氧分析仪
产品概述
ST600-SZM1000系列高温氧化锆氧气分析模块采用固态电解质氧化锆陶瓷测量技术，核心传感器采用耐高温设计，耐温可达500℃。可在高温环境中长期稳定工作。产品具有耐温高、测量精度高、响应速度快以及性能稳定可靠等优点，可广泛应用于惰性气体在线分析等领域。
主要特点
- 耐高温设计：核心传感器耐温可达500℃，可在高温环境中长期稳定工作
- 固态电解质技术：采用氧化锆陶瓷测量技术，测量精度高、响应速度快
- 多种测量方式：支持抽取式测量和原位安装测量两种方式
- 高精度：测量精度≤±1%F.S.
- 快速响应：T90响应时间小于60秒
- 高分辨率彩色触摸屏：中文菜单，操作方便
- 曲线显示：实时测量值与曲线同步显示，历史数据曲线显示
- 单/双通道设置：可选多种传感器或测量模块接入，为客户节约成本
- 大容量数据存储：可存储120万条数据，历史数据、曲线查询功能
- 控制功能：可升级条件控制、流程控制功能
- 316L材质：探头材质为316L不锈钢，耐腐蚀、耐高温
- 高防护等级：IP65
技术参数
| 参数 | 规格 |
|---|---|
| 测量原理 | 氧化锆法（固态电解质陶瓷） |
| 测量方式 | 抽取式测量 / 原位安装测量 |
| 测量范围 | 0-100/1000ppm / 1.00/21.00% |
| 测量精度 | ≤±1%F.S. |
| 响应时间 | 小于60秒（T90） |
| 耐温 | 可达500℃ |
| 环境温度 | -10 — +50℃ |
| 环境湿度 | ＜80%RH，无结露 |
| 供电电源 | 24VDC / 50W |
| 模拟输出 | 两路标准4～20mA（带载能力500欧） |
| 数字信号 | RS232，支持标准Modbus协议 |
| 连接线长度 | 1.2米（其他长度可定制） |
| 探头材质 | 316L不锈钢 |
| 使用寿命 | ＞24个月（正常使用条件下） |
| 仪表重量 | 1kg |
Applications
- 惰性气体在线分析
- 高温工业炉窑烟气氧含量监测
- 燃烧过程氧含量优化控制
- 热处理气氛控制
- 化工过程气体氧含量在线检测
SZM-1000 Zirconia Oxygen Measurement Module
Zirconia oxygen content measurement module
Applications
Products are widely used across the following industries and scenarios
Covering water treatment systems, boiler circulation systems, equipment cooling water systems, power plant chemical water analysis, pure and ultrapure water systems, and other critical application scenarios
Maintenance Advantages
Related Products
SDC6800 Series Multi-Function 4-Channel Online Gas Oxygen Analyzer
Multi-function four-channel online gas-phase oxygen analyzer
ST600-YG2 Online Optical Gas Oxygen Analyzer
Online optical fluorescence gas-phase oxygen analyzer
ST600-OXY-GAS Series Dual-Channel Online Trace Gas Oxygen Analyzer, Developed for High-Humidity, Toxic & Organic Mixed Gas
Dual-channel online trace gas oxygen analyzer developed for high-humidity, toxic and organic mixed gas. 0.001% resolution, T90<20s, poisoning- and corrosion-resistant electrode with optional sample pretreatment; 1-2 channels of gas/D.O. sensors, 5-inch color touchscreen, RS485. For chemical, pharmaceutical solvent recovery, coal chemical, petrochemical and semiconductor special-gas processes.
SZM-2000 Zirconia Oxygen Measurement Module Gas Analyzer
Zirconia oxygen content measurement module for gas analysis
ST600-SZM2000B Zirconia Oxygen Monitoring System High Precision Oxygen Analyzer
Zirconia oxygen monitoring system with solid electrolyte ceramic sensing and a high-temperature integrated sensor (up to 500°C). Extractive sampling enables stable operation in both high and low temperatures. Accuracy ≤±1%F.S., fast response (T90 under 60s).
ZO-200B Series Online Gas Oxygen Analyzer
Online gas-phase oxygen analyzer series
SC-O2FM Fiber Optic Fluorescence Oxygen Detector
Fiber optic fluorescence oxygen detector
ZO-200 Online Zirconia Oxygen Analyzer
Online zirconia oxygen analyzer
SC-DK220 Industrial Control Online Oxygen Monitor
Industrial control online oxygen monitor with sample pretreatment system
SC-O2FMZ1 Needle-Type Fiber Optic Fluorescence Oxygen Detector
Needle-type fiber optic fluorescence oxygen detector with wireless transmission
ST600EX-OXY-GX Series Multi-Function Intelligent Dual-Channel Explosion-Proof Online Gas Analyzer
Multi-function explosion-proof dual-channel online gas analyzer
SDC5800-GX Series Multi-Function 4-Channel Intelligent Online Gas Analyzer
Multi-function four-channel online gas analyzer for organic, toxic, high-humidity, and corrosive gases/liquids with support for oxygen, ammonia, nitrogen, pH, conductivity, turbidity, and sodium sensors
ST600-YGJX1 Online Optical Gas Oxygen Analyzer
Online optical fluorescence gas-phase oxygen analyzer based on fluorescence quenching and phase/lifetime fluorometry. No membrane, electrolyte or anode; near zero maintenance with annual calibration. Continuous measurement of 0-100% O2, optional trace-O2 ranges, built-in T/P compensation, RS485/Modbus with optional wireless and cloud remote monitoring.
忻成科技ST600X-PO2系列在线防爆极谱氧分析仪双通道耐腐蚀、有毒、有机混合气体检测
忻成科技ST600X-PO2系列在线防爆极谱氧分析仪，面向高湿、有毒、腐蚀性及含有机溶剂蒸气（四氢呋喃、丙酮、乙醇等）的复杂混合气体工况，实现低维护、低漂移、高精度的氧含量在线监测。气体氧量程0.001%–65.00%、分辨率0.001%、可支持0.01%级精细控制，响应T90＜20s；可选1–2路，采用耐有机/耐强酸强碱材料与全数字电极，支持实验室维护校准与兼容点位快速互换；变送器防爆 Ex db [ia Ga] IIC T6 Gb，氧传感器 Ex ia IIC T6 Ga。适用于反应釜氮封、离心机置换、罐体顶部空间及有机溶剂惰化等场景，支持多点分时取样与PLC/DCS联锁集成。